 
Salient Features
Custom Shapes and Sizes
Net shape forging no machining required
Sand Blasting available
Available in Carbon Steel Materials
Product Description
Torsion bars are used to absorb the shock in the chassis or a vehicle. They can be used in conjunction with other ride control components to provide a smoother ride. KDK manufactures torsion bars in a variety of shapes and sizes for several different applications. The diameters of the Torsion bars can range from 1 inch to 2 ½ inches. The length of automotive torsion bars typically range from 3 feet to 5 feet. Torsion bars are created to suit the head configuration as dictated by the customer. Torsion bar forgings made by KDK can be in a round head configuration or in a hex configuration. Typically, in the round head configuration, the end would then be machined and then they would have a spline machined into them. The hex head configuration would not require any machining after the forging process and would be idea in certain applications. Torsion bars can be coated or heat treated after the forging process depending upon the application. KDK has several different head configurations for Torsion bars in stock. The forging process adds strength to the Torsion bar allowing is to twist back and forth over the lifecycle of the vehicle. One of the common problems that has come from the use of forgings has been the appearance of flash lines or parting lines. KDK torsion bar forgings are made with minimal parting lines and can be eliminated completely. Please send us a copy of your torsion bar drawing and we will be happy to review your part and send a quote to you.
Experience
KDK has produced quality torsion bars for over 15 years. We have produced torsion bars for many different vehicles for some of the leading equipment manufacturers in North America.
Applications
Torsion bars are used in these industries: automotive, off-highway, and agriculture equipment. |
